Product Categories
Social Media
Home > News > Content
The Proper Use Of Fire Hose
- Jun 05, 2017 -

    Fire water is divided into two types of lining and lining. Unlined water with cotton belt, linen water strip, ramie water belt. Organize the correct use of fire hose with the relevant information, for reference only. The following are the same as the "

   The proper use of fire hose.Fire Hose

1, open the fire guard door, remove the hose, water gun. The following are the same as the "

2, check the water and joints are good, if damaged is strictly prohibited. The following are the same as the "

3, to the direction of the fire laying water, to avoid twisting. The following are the same as the "

4, the water near the fire hydrant end connected with the fire hydrant, connecting the connection button will be inserted into the chute, according to clockwise tightening. The following are the same as the "Fire Hose

5, connect the other end of the water hose to the water gun (the connection procedure is the same as the fire hydrant connection). The following are the same as the "

6, after the connection is complete, at least 2 people grip the water gun, aimed at the fire (not on people, to prevent high pressure water wounding). The following are the same as the "

7, slowly open the fire hydrant valve to the maximum, against the fire to the root of the fire. The following are the same as the "

8, fire hose connection, fire protection hose in the set with fire hose interface, the need to pad a layer of soft protector, and then with galvanized iron wire or throat tightening. The following are the same as the "

9, the use of fire hose. When using fire hose, high pressure fire hose should be connected to the water pump near the place, after filling the water hose should be to prevent the reverse or sudden bending, and should prevent the fire hose interface collision damage.Fire Hose

10, fire hose laying. Laying fire hose, to avoid the sharp objects and a variety of oil, to the height of the vertical laying fire hose, the use of fire hose hook, through the traffic guide laying fire hose, should be pad on the fire hose Bridge, through the railway, the fire hose should pass from below the track to avoid the fire hose was crushed by the wheels and intermittent water supply. The following are the same as the "Fire Hose

11, to prevent ice. Winter season, in the fire to be suspended when the water supply, in order to prevent the fire hose ice, the pump to be slow operation, to maintain a smaller amount of water. The following are the same as the "

12, fire hose cleaning, fire hose after use, to clean, the transmission of foam fire hose, must be carefully washed, protective layer. In order to remove the grease on the fire hose, you can use warm water or soap to wash the frozen water hose, the first to use the melting, and then clean the dry, no dry fire hose should not be reel stored.